D-SUB Car Needle Male Head Straight Insertion Rear Rivet 6.0 Copper Pillar, Front Lock 4.8 Nut

D-SUB 90 Degree 8.08mm Front Lock 4.8mm Nut Socket

D-SUB90 Degree 8.08mm Front Lock 5.8mm Nut Plug

D-SUB CRIMP Female Head

D-SUB CRIMP Male Head

D-SUB High-density Wire Bonding Female Head

D-SUB High-density Wire Bonding Male Head

J30JR Reverse Series \ J30JR-TK&J30JR-ZJ

This series of products is designed for plug insertion and socket insertion, which is exactly opposite to J30JR-TJ/ZK. The wire numbers (hole positions) are also opposite to J30JR-TJ/ZK

J30JM1 Glass Sintering Sealing Welding Type \ J30JM1-ZKS

This is a J30J product with higher sealing indicators (note that only the socket end is sealed), using a glass sintered structure, and is used in conjunction with ordinary J30J series plugs and locking components.

J30JM Rubber Seal Crimping Type \ J30JM-ZKS

The J30J sealed welded product has the same performance indicators as the J30JM-ZK basic crimping type, except for insulation resistance (≥ 2000M Ω) which is different from the J30J ordinary type. Other performance indicators are exactly the same as the J30J, and an air leakage rate indicator is added, which is 5.0 × 10-2Pa · cm ³/s.

J30J Compression Expansion Type \ J30J-TJ-Q&J30J-ZK-Q

The length, width, and installation hole spacing of the shell flange are increased, and a flange interface sealing gasket is provided

37P Zinc Alloy Shell