Mixed Coaxial Connector

D-SUB coaxial connectors are specifically designed for transmitting RF signals in coaxial cables. Due to their excellent signal integrity and shielding performance, they are very popular in frequency signal transmission applications and are widely used in communication systems, testing and measurement equipment, military and aerospace, medical equipment, and other fields.

Mixed Current Connector

The hybrid D-SUB current connector can integrate signals, high currents, and high voltages within the same D-SUB interface, achieving diverse connection requirements. It is widely used in industrial control, power systems, telecommunications equipment, military and aerospace, medical equipment, and other fields.

D-SUB High-density Connector

The D-SUB high-density connector is one of the products in the Cognite D-SUB series, which has a higher pin density and provides more connection points in the same space. It is suitable for communication systems, industrial automation, medical equipment, military and aerospace, instrumentation and other fields. Cognite's I/O connector solution achieves network and storage interconnection technology by providing high-density and high-speed interfaces, and standardized I/O solutions fully comply with industrial standards.

Standard D-type Connector

D-SUB standard density connector is a common electrical connector widely used in transportation, medical equipment, industrial automation, consumer electronics, testing and metrology, and other fields. Kenet offers a variety of pole numbers: 09, 15, 25, 37, 50 cores, etc; Multiple installation options, including vertical and right angle installation methods.

J30J Locking Component

In the J30J-TJ/ZK basic product, the L7 locking component has its screw end lower than the end face of the housing after locking.

J30JR Reverse Series \ J30JR-TK&J30JR-ZJ

This series of products is designed for plug insertion and socket insertion, which is exactly opposite to J30JR-TJ/ZK. The wire numbers (hole positions) are also opposite to J30JR-TJ/ZK

J30JM Rubber Seal Crimping Type \ J30JM-ZKS

The J30J sealed welded product has the same performance indicators as the J30JM-ZK basic crimping type, except for insulation resistance (≥ 2000M Ω) which is different from the J30J ordinary type. Other performance indicators are exactly the same as the J30J, and an air leakage rate indicator is added, which is 5.0 × 10-2Pa · cm ³/s.

J30JA Plug in Printed Circuit Board Expansion Type \ J30JA-ZKW-J

The tail end of the contact piece is connected to the printed board in a bent insertion manner, with a grid size of 1.27 × 2.54 (column × row)

J30JA Plug in Printed Circuit Board Expansion Type \ J30JA-ZKN-J

The tail end of the contact piece is connected to the printed board in a bent insertion manner, with a grid size of 1.27 × 2.54 (column × row)

J30JA Plug in Printed Circuit Board Expansion Type \ J30JA-ZKW

The tail end of the contact piece is connected to the printed board in a bent plug-in manner, with a grid size of 2.54 × 2.54 (column × row)

J30JA Quick Lock Compression Expansion Type \ J30JA-TJ&J30JA-ZK

J30JA-9、15、21、25、31、37、51、66、74、100、144TJ

J30J Welding Basic Types \ J30J-TJS&J30J-ZKS

A basic welded product with a tail end spacing of 1.27 × 1.1 (column × row).